Album: Steve's '05 Subaru STI
Look for Steve at NE Dragway this summer.

Album: 94 Supra TT Build

Album: Goody's Subaru STI
Check out this 500whp daily driver

Album: Sean's Viper SRT-10
This project included; a Centerforce clutch and Fidanza flywheel, Roe Racing supercharger kit, Roe Racing 3" exhaust with metal cell cats, Roe Racing water/meth injection, Mopar MLS headgasket install, Jesel roller rockers, Uprated half-shafts, Stainless brake lines, rotors, pads, 5-1 headers, Custom paint & fabrication and lots of other go-fast bits!.

Album: Custom VW 1.8t turbo manifold

Album: 500whp 2006 STI Build

Album: '00 Dodge Viper GTS Build
This will be a potent street car once we are done. Some of the parts include; Roe Racing supercharger, H20/meth injection, B&B headers and exhaust with custom 3" cats, cam, built heads, pistons and it's all controlled with a VEC2 management system and tuned on our dyno.

Album: Dodge Viper SRT-10
On this Viper we installed a Fidanza flywheel, Moton coilovers, Belanger headers and fabricated a pair of catted mid-pipes.

Album: Ben's Acura GSR Turbo
Ben came to us with a damaged engine and a nearly new turbo kit. The first step was getting a solid short block under it so we sent out his B18C1 to Benson's Machine to have it sleeved with custom Darton sleeves. For internals we chose CP pistons and Eagle rods. Factory acura gaskets and pumps were used during reassembly.

Album: S13 Custom Intercooler mount and pipes
Our customer brought us this car with the OBD2 Greddy kit and requested that we build a custom intercooler setup for him.

Album: Bob's '05 Subaru STI
To start off this STI project, we installed CP pistons and an Ultimate Racing rotated-mount turbo kit. Bob already had a large APS front mount so we fabricated a set of custom stainless steel charge pipes with an integrated blow through MAF setup for him. In additon to our custom parts this car features a slew of performance parts to support the boost supplied by the Garrett GT30R ball bearing turbo.

Album: F1com Viper Wing
Pictures of the F1com Viper GTS wing. Final version features carbon fiber adjustable lip and honeycomb core.