Greddy front mount intercooler mounted

F1Dyno custom downpipe and wastegate dumptube. All connections are secured with V-band clamps.

Downpipe and F1Dyno 2000* Ceramic coating on the turbine housing.

This is the Boost Logic turbo manifold and 44mm Tial wastegate. We cut off the old wastegate flange and TIG welded on the new 44mm Tial flange.

Custom flange for oil return line.

flange 2

Oil return line test fit.

In order to use this compressor cover we had to cut off about 2" and TIG weld on a cast 3" 90 degree bend at the correct angle

The inside of this junction was carefully ported to avoid any extra turbulance.

Custom charge pipe designed to mate up to the pipes provided in the Greddy intercooler kit.

*

Three Walboro 255lph HP pumps provide ample fuel for almost any Supra. These are good for nearly 1500hp on gasoline